Our line of ETL listed to UL 48 Volt DC split phase 120/240 Volt AC inverter chargers is the powerhouse for backup, off-grid systems. Built with a 48 Volt DC input, 12kw/48v Aims power inverter inverter-chargers perform with very little power loss. Users receive a notable increase in efficiency in large systems when compared to using inverters that accept 12 or 24 volts. This can be an attractive feature for sustainability lovers looking to live as efficiently as possible. The most common use for this inverter is emergency backup power for residences and businesses. You’ll always be prepared for the next power outage with the access of up to 12,000 watts (depending on the model) of continuous power and 36,000 watts of surge (for up to 20 seconds).
Growatt 3KVA Transformer Inverter 24VDC has the following features 1 Integrated MPPT charge controller 2 Battery charging priority can be set 3 Load supply priority can be set 4 Optional WIFI/ GPRS remote monitoring 5 Parallel operation up to 6 units only available for 4-5KVA
Growatt 3KVA Transformer Inverter 48VDC has these features 1 Integrated MPPT charge controller 2 Battery charging priority can be set 3 Load supply priority can be set 4 Optional WIFI/ GPRS remote monitoring 5 Parallel operation up to 6 units only available for 4-5KVA
Integrated MPPT charge controller Battery charging priority can be set Load supply priority can be set Optional WIFI/ GPRS remote monitoring can be parallelled to up to 6 units
Built-in maximum power point tracking algorithm which could promote energy utilization efficiency of pv system. The charging efficiency is 15%~20% higher than PWM mode. Adopting sorts of tracking algorithms to track the best working point of the I-V curve promptly and accurately within 15 seconds, the MPPT efficiency could reach to 99.9%. With the use of advanced digital power technology, circuit energy conversion efficiency is as high as 96% Four-stage charging order mode: MPPT-equalizing charging-boost charging-float charging With current-limiting charging mode when the power of solar panel is over-sized and charging current exceeds the rated current, the controller will lower the charging power, which enables the system to work under the rated charging current. The controller can realize networking operation by the link with telecommunication cable.